Warning: Illegal string offset 'allow_html' in [path]/geek/gars/mods/display/references.php on line 21
Recording Drums At Home - Recording Drums and Drum Mics
drums drum set drummer
Drums resource and community for the online drummer
  The time is now 05:54 AM GMT -4.  
Search Drum Set Connect:
Site Features
Drum Forum
Drum Lessons
Drum Reviews
Drum Kit Photos
Drum T-Shirts
Premium Membership
Get in Touch
Link to us
Contact us
Find Drums

Go Back   Drum Forum at Drum Set Connect > Drum Lessons > Recording Drums and Drum Mics

Closed Article
Article Tools Display Modes
Recording Drums At Home
Recording Drums At Home
Guide to mic'ing up your drums and recording at home
Published by Drum Set Connect
Post Recording Drums At Home

Although I've had numerous opportunities to record in "real" recording studios, I often prefer the laid-back comfort of my own living room. My home setup has neither the carefully constructed walls nor the special acoustic treatments of a well-designed studio; but the no-cost, no-rush feeling of working in my own space and the comfortable amenities of my home (a fridge stocked with more than just cheap cans of beer, windows that let in sunlight, a back porch to sit on) have been compelling arguments to stay at home.

Over the years, my goal has been to make recordings in my home that approach the quality of recordings made in pro studios; and I've since discovered some techniques that can make my modest living room sound more like a big studio. For me, the sound of a "real" studio vs a home setup has more to do with the live sound than it does the cost of equipment: it's the interaction of the instruments with the room and how that interaction is captured on tape. With no other instrument is this more evident than with a drum kit.

A typical home recording of a drum kit sounds exactly like it was recorded at home—in a small room. On the other hand, a drum kit recorded in a pro studio will tend to sound bigger—with the ambience of a large tracking room giving life to the drums.

This recipe is one way that I achieve that bigger drum sound in the confines of my humble home. Let's go through this recipe in steps.

Control the acoustics in your room.
Most rooms in a house are boxes with parallel walls, floors, and ceilings. Parallel surfaces tend to accentuate some frequencies while attenuating others, and corners in which surfaces meet collect and release low end. To capture as smooth of a sound as possible, you want to reduce the detrimental effects of your room's square geometry. You can spend a lot of money on special treatments, or you can use what you've got lying around the house. Let's go the cheaper route and save the money for buying more mics.

Here's what I did in my living room. Equipment racks, large tape machines, and tall shelves are pushed into the corners. I found some surplus acoustic foam and placed it on one wall. I attached remnants of a shag rug on the opposite wall and covered the ugly rug with a curtain. A heavy cotton futon pushed against the wall with the largest unbroken span makes a great bass-trap, soaking up unwanted bass resonance.

Be careful not to overtreat your room. If you use too much foam or too many rugs, you'll end up with a room that sounds "dead." Higher frequencies will be absorbed while lower frequencies will run rampant, leaving you with the typical bedroom sound.

Experiment with the position of the drum kit until you find a position in your room that minimizes room resonances.
I would recommend that you start with the kick drum facing a piece of furniture that operates as a bass-trap. Doing this will reduce the nasty lower-mid resonances that small rooms typically exhibit. These resonances contribute to the muddy sound of small rooms—anything you can do to reduce these resonances will make your room sound less like a box.

I like to face the kit into my aforementioned futon "bass-trap."

Play around with different floor surfaces. Don't just settle for what you have.
I used to use a shag rug (the remnants of which are now on the wall) as a drum rug. It was ugly, but it protected my wood floor from scratches and kept the drums from sliding everywhere.

One day, I found a perfectly-sized and not-as-ugly rug for sale at a local supermarket for $12. Unlike the shag rug, this one was tightly woven and quite stiff. It made a huge difference in the sound of the snare drum. The mics picked up much more of the snare's crack.

If you're pining for an even "brighter" floor surface, try a localized treatment. A clipboard placed underneath the snare drum can really liven up the snare.

Start with a good pair of overhead mics.
Think of your overheads as more than just cymbal mics.

While close mics tend to focus on the attack of each drum hit, carefully positioned overheads will pick up more of the "body" of each drum, affording you a fuller sound than what you could achieve with just close mics.

My preference is to use two overhead mics to pick up a stereo image of the whole kit.

As a general rule of thumb, two mics recording the same sound source should be the exact same distance to that sound source when you're trying to achieve a phase-coherent, mono-compatible, stereo spread. Otherwise, you'll end up with phase cancellation of some frequencies. Recalling that the box shape of the typical home studio tends to accentuate some frequencies while attenuating others, any additional phase cancellation will further detriment the sound.

That's why I prefer to set up my overhead mics in a modified X-Y pattern, with the diaphragms of the two mics as close together as possible. This way, everything they pick up will be phase-coherent: all sounds will hit both mics at the same time. Therefore, the pair of mics will not contribute additional peaks and dips to the frequency response of the room.

You can vary the relative amounts of drums vs cymbals by moving the pair of mics up & down or forward & backward, or by pointing the mics closer into the drums or further outward toward the cymbals. I usually start with the overheads about six feet off the ground, directly above the drums.

Because the signal from the overheads will be the foundation of the drum sound, choose your best mics and mic preamps for this task.

Add close mics as necessary.
Once you're happy with the sound of your overheads, you may want to add close mics to spice up some or all of the individual drums.

I'm a big fan of using omni mics on the kick and snare, especially the Earthworks micro-diaphragm condensors. Because omni mics don't exhibit proximity-effect, you can place them right up to a sound source without picking up an unnatural boost of the low-mid frequencies.

Be cognisant of phase-cancellation as you bring in more mics. You may need to flip the phase on some of the individual close mics or move the overheads closer to or away from the drums. If you're mixing with a digital console or using a DAW as your playback engine, you can delay the tracks recorded with the close mics so that the drum-hits picked up by the close mics line up in time with the drum-hits picked up by the overheads.

Don't rely on EQ to define the sound of your room.
EQ'ing multiple mics or even EQ'ing one mic out of a multi-mic setup won't sound as good as getting all your mics to pick up the right sound in the first place. Furthermore, an EQ can't smooth out the sharp peaks and dips of a poor sounding room. Therefore, unless you're using the EQ as an effect, use it sparingly. Focus first on making your room sound good. Then play with mic position to obtain the sound you desire.

Use room mics to add ambience. Place these room mics in another room.
A typical mic setup in a large studio involves setting up room mics far from the drum kit to pick up the studio's natural reverb. Oftentimes, these room mics are faced into walls to pick up less direct sound and more reflected sound. Unfortunately, using this technique at home usually results in a smaller sound, not a bigger sound. You end up accentuating all the anomolies—and therefore the acoustic character—of a small room.

Fortunately, homes tend to have multiple rooms. So it's easy enough to open a door and place your room mics in an adjoining room. I prefer miking my kitchen, with its hard surfaces providing natual reverb and the large appliances providing ample diffusion. I place the room mics near one corner of the kitchen, making sure there isn't direct line of sight through the open doorway between the mics in the kitchen and the drum kit in the living room.

If I need an even bigger sounding space, I'll delay the room mics during mixing by 10-15 ms.

Think of this article as one person's starting point. Then explore your own tangents and break your own boundaries. Try something new. Celebrate serendipity, and revel in the fact that you're not paying big-studio rates to record in your living room.

Shop for drum and percussion mics at Musician's Friend

Article Tools

By eljay23 on 03-31-2008, 10:32 AM
Re: Recording Drums At Home

no cost, no rush. how about super expensive, lower rush. or did someone give you all this. perhaps you found some mics on the side of the road, with your free computer running the linux version of pro tools. cause i hear thats free too
By Thunderfoot on 07-28-2008, 07:50 AM
Thumbs up Re: Recording Drums At Home

When time is tight and there's not loads of great equipment, then a pair of stereo overhead mics for 'room sound' and then a mic near the kick, but not too near....about 6 inches to a foot away, to get the real tone of the drum......( Very dampened kits will be mic'ed up completely differently however; I am describing a good recording set up for an open sounding kit with little or no dampening)........ place a mic directly above the drummers head pointing toward the snare drum, in a place where flailing arms will not hit it. In order to not get too much cymbal spill on to the overheads, place them behind the drummer slightly facing away from the cymbals....Or try putting them 2 feet off the ground either side of drum kit (ie) L and R of kit as you sit at it, and then setting the cymbals as high as you can, while still being to play in an uncompromised manner.
Its a lot easier to record with lots of closer micing and lots of dampeneing, but you will lose a bit of 'ambient sound'....
Lastly you need a good drummer with great tuned kit!!!! That's the hardest bit, playing well and not getting recording nerves!
By yairisan on 09-11-2009, 01:51 AM
Thumbs down Re: Recording Drums At Home

Originally Posted by eljay23 View Post
no cost, no rush. how about super expensive, lower rush. or did someone give you all this. perhaps you found some mics on the side of the road, with your free computer running the linux version of pro tools. cause i hear thats free too
I think we can be pretty sure he didn't find any mics laying in the road. He saved a lot of money going DIY, and not on a studio clock, and shared his experiences in a clearly-written article.
Closed Article

Article Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Similar Threads for: Recording Drums At Home
Article Article Starter Category Comments Last Post
'Lectric Drums Chris Jude Play the Drums - Drum Talk 17 12-09-2010 08:08 PM
Storing drums in bad places Crash Play the Drums - Drum Talk 13 03-17-2009 11:07 AM
Drums in basement gyutae Play the Drums - Drum Talk 10 03-03-2009 03:27 PM
Denting your drums Tama king Play the Drums - Drum Talk 4 03-31-2008 10:36 AM

The time is now 05:54 AM GMT -4.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

Article powered by GARS 2.1.8c ©2005-2006

      Copyright © 2007 Teaguy Design. All Rights Reserved.  
About Us